Shanghai Aboom Metal prodcut co.,ltd
Shanghai Aboom Metal prodcut co.,ltd Your success is the most important thing in our heart
Add to Cart
2507 / F53 Super Duplex Stainless Steel Plate S32750 Steel Plate Stock 25% Cr
2507 / F53 Super duplex stainless steel plate S32750 steel plate stock 25%Cr
National standards:
| ASTM / ASME: A240-UNS S32750 |
| EURONORM: 1.4410-X2 Cr Ni MoN 25.7.4 |
| AFNOR: Z3 CN 25.06 Az |
| DIN / EN 1.4410, ASME SA-240 |
Regular size(mm):
Cold rolled sheet
0.5 * 1219 * C
1.0 * 1219 * C
1.5 * 1219 * C
2.0 * 1219 * C
2.5 * 1219 * C
3.0 * 1219 * C
Hot rolled Plate
3.0 * 1500 * c
4.0 * 1500 * c
5.0 * 1500 * c
6.0 * 1500 * c
8.0 * 1500 * c
10 * 1500 * c
12 * 1500 * c
14 * 1500 * c
16 * 1500 * 6000
18 * 1500 * 6000
20 * 1500 * 6000
25 * 1500 * 6000
30 * 1500 * 6000
Special sizes can be customized according to customer requirements
General attributes:
2507 / F53 alloy is a super duplex stainless steel composed of 25% chromium, 4% molybdenum and 7% nickel. Its strength and corrosion resistance are strong, mainly used in chemical processing, petrochemical and subsea equipment. It has strong resistance to chloride corrosion, higher thermal conductivity and lower thermal expansion coefficient. The high chromium, molybdenum and nickel content makes it highly resistant to pitting, crevice and uniform corrosion.
Its impact strength is also very high. 2507 / F53 Super duplex stainless steel alloy is not suitable for use at temperatures higher than 570 ° F. For a long time in such an environment, its toughness will decrease.
Application area:
Oil and gas industry equipment
Offshore platforms, heat exchangers, underwater equipment, fire fighting equipment
Chemical processing industry, utensils and pipes
Desalination plants, high-pressure RO plants and subsea pipelines
Mechanical parts (high-strength, corrosion-resistant parts)
Energy industry FGD system, industrial scrubbing system, absorption tower
Mechanical properties Tensile strength: σb≥730Mpa Elongation: δ≥15%
Material description: The main chemical components Cr, Ni, Mo, N, etc. have a certain degree of improvement over 2205, 2304, 2101. It has better performance in terms of oxidation resistance, acid corrosion resistance, seawater corrosion resistance, chloride ion corrosion, etc. It also has good strength.
Typical working conditions :30% dilute sulfuric acid, below 60 ℃, annual corrosion rate <0.1mm
SHANGHAI ABOOM METAL PRODUCT CO.,LTD
Address:ROOM 412,NO.452 CHEFENG ROAD,
SongjiangDistrict , Shanghai ,201601,P.R.China