Shanghai Aboom Metal prodcut co.,ltd
Shanghai Aboom Metal prodcut co.,ltd Your success is the most important thing in our heart
Add to Cart
17-7PH Precipitation Hardened Stainless Steel Round Bar Stock NAS631 S17700
17-7PH precipitation hardened stainless steel round bar stock NAS631 S17700
17-7PH is an austenite-martensitic precipitation-hardening stainless steel developed on the basis of 18-8CrNi, also known as controlled phase change stainless steel. After solution treatment, it is an unstable austenite structure with good plasticity and toughness. And workability, adjusted to make the austenite precipitated carbide composition change, and then after martensite transformation treatment, most of the structure is transformed into low toughness tempered martensite with better toughness, this state is the use of steel State, with good medium temperature mechanical properties. Corrosion resistance is better than general martensitic stainless steel.
| 3/16" | 1/4" | 5/16" | 3/8" | 7/16" | 1/2" | 9/16" | 5/8" | 3/4" | 7/8" | 1" |
|---|---|---|---|---|---|---|---|---|---|---|
| 4.8mm | 6.3mm | 7.9mm | 9.5mm | 11.1mm | 12.7mm | 14.3mm | 15.9mm | 19mm | 22.2mm | 25.4mm |
| 1 1/8" | 1 1/4" | 1 1/2" | 1 3/4" | 2" | 2 1/4" | 2 1/2" | 2 3/4" | 3" | 3 1/2" | 4" |
| 28.6mm | 31.8mm | 38.1mm | 44.5mm | 50.8mm | 57.2mm | 63.5mm | 69.9mm | 76.2mm | 88.9mm | 101.6mm |
Application area:
Offshore platforms, helicopter decks, other platforms
food industry
Pulp and paper industry
Aerospace (turbine blades)
mechanical part
Nuclear waste barrel
Grade comparison:
chemical composition:
